Standard Error Calculator

Work out the standard error of a sample mean or a sample proportion, and the margin of error it implies.

by Calcuatany.com

The standard error of a mean estimates how much a sample mean varies between repeated samples of the same size. It is SE = s / √n, where s is the sample standard deviation and n is the sample size. Standard deviation describes the spread of individual observations; standard error describes the precision of their average.

For a proportion, SE(p) = √(p(1 − p) / n). A margin of error multiplies the standard error by a critical value. This calculator uses normal critical values of approximately 1.645 for 90%, 1.960 for 95% and 2.576 for 99%. A higher confidence level produces a wider margin.

How to use the Standard Error Calculator

  1. Enter the sample standard deviation and sample size for the standard error of the mean. Sample size is treated as a whole number and must be at least 2.
  2. Enter the observed proportion as a decimal from 0 to 1, such as 0.42 for 42%, and enter its sample size.
  3. Choose a 90%, 95% or 99% confidence level. The same normal critical value is applied to both displayed margins of error.
  4. Read the standard errors and margins separately. The proportion results are shown in percentage points, not as percentages of the estimate.
  5. Check the normal-approximation message. If either np or n(1−p) is below 10, a normal margin for the proportion may be unreliable.

Formula

SE = s / √n for a mean, and SE(p) = √(p(1−p)/n) for a proportion

Example: standard errors from a mean and a proportion

For a sample standard deviation of 4.2 and a sample size of 30, SE = 4.2 / √30 = 0.7668. Using the unrounded value, the 95% normal margin of error is about 1.5029.

For a proportion of 0.42 from 100 observations, SE = √(0.42 × 0.58 / 100) = 0.0494, or 4.94 percentage points. The 95% normal margin is about 9.69 percentage points. Both expected counts exceed 10, so the page labels the normal approximation reasonable.

How to interpret the result

Standard error decreases with the square root of sample size. Doubling the sample reduces it by a factor of √2, not by half; quadrupling the sample halves it.

A larger confidence level requires a wider margin. Moving from 95% to 99% increases the critical value from about 1.96 to 2.576 even though the underlying standard error does not change.

A margin of error describes sampling uncertainty under the model. It does not include bias, nonresponse, poor measurement, clustering or an unrepresentative sample.

Next, you may also find these useful: Average & Standard Deviation, Z-Score Calculator, T-Test Calculator.

Assumptions and limitations

  • The observations should be independent or the calculation should be adjusted for the sampling design. Clustered and weighted samples can have larger uncertainty.
  • The mean margin uses a normal critical value. When the population standard deviation is unknown and the mean sample is small, a Student t critical value is usually more appropriate.
  • The proportion margin is the basic Wald normal approximation. It can behave poorly near 0 or 1 and with small samples; use a Wilson or exact interval when those limitations matter.
  • Confidence intervals address repeated-sampling coverage under assumptions. They do not mean there is a stated probability that a fixed population parameter lies in one already-calculated interval.

Frequently asked questions

What is the difference between standard deviation and standard error?

Standard deviation describes variation among individual observations. Standard error describes uncertainty in an estimate such as a mean and equals the sample standard deviation divided by the square root of sample size.

How is margin of error calculated?

Multiply the standard error by the critical value for the selected confidence level. This calculator uses approximately 1.645 for 90%, 1.960 for 95% and 2.576 for 99%.

Does doubling the sample halve the standard error?

No. Because standard error follows 1/√n, doubling the sample multiplies it by about 0.707. You need four times the sample to halve the standard error.

Why is the proportion margin shown in percentage points?

A change from 42% to 47% is five percentage points. Showing the margin in percentage points makes it directly addable to and subtractable from the observed proportion.

When is the normal approximation questionable?

A common check is whether both np and n(1−p) are at least 10. If either expected count is smaller, the normal approximation can be inaccurate, especially near 0 or 1.

Does this include survey bias?

No. The result measures only the sampling component under a simple model. Selection bias, nonresponse, wording effects and measurement errors can be more important than the displayed margin.

Sources and further reading

Last reviewed: 2026-10-06. See our editorial policy.

Related calculators

For informational purposes only. Full disclaimer